Husky Mount 32″-65″ Full Motion Articulating TV Wall Mount LED LCD Plasma

(4 customer reviews)


Out of stock

SKU: 112873254117 Category:
BiltPros Exclusive Benefits:
Warranty Money Back Easy Returns



    • Maximum load capacity: 80 lbs/37 kg
    • VESA compliant up to 400 x 400mm
    • Full-Motion swivels 130° left and right
    • Tilts down for optimum viewing angle and reduce glare
    • Extends up to 13″ and folds back flat on the wall.
    • Dual arm sturdy contraction
    • Double wood stud mounting or concrete/brick wall mounting
    • Heavy-Duty steel construction
    • Open space behind the TV when extended for easy cables access
    • Easy installation
    • Includes all necessary hardware and instructions
    • Lifetime warranty

The display screen size is only an approximation. Your TV is compatible with this mount as long as your displaay has a VESA mounting pattern and weight that fit within the size and weight limits listed above.

Will This Mount Fit My TV?

Two factors will determine whether this heavy duty TV mount is compatible with your TV:

      1. VESA Patterns: This mount has standard VESA patterns of 50x50mm, 75x75mm, 100x100mm and 200x200mm, 400x200mm and 400x400mm. The distance between the mounting holes on the back of your TV should be 16″ or less in width and 16″ or less in height.
      2. Weight: Your TV weight should not exceed 100 lb. This is recommended for 32″-65″ TVs. However the mount can fit bigger sizes as long as the weight and the VESA patterns are within range.

Additional information

VESA Hole Pattern

50x50mm, 75x75mm, 100x100mm, 200x200mm, 400x200mm, 400x400mm

Fits TV Screen Size Up To



Full Motion




Husky Mount

4 reviews for Husky Mount 32″-65″ Full Motion Articulating TV Wall Mount LED LCD Plasma

  1. This product is strong and sturdy. It’s mounting instructions are easy to understand. You will need two people to mount this without damage to your walls and a to acheive a level mount. 

  2. Hung a 48″ TV on it. It is solid and works like a charm. We have been very pleased with it and know it would have handled a heavier TV. The TV we mounted was a 48″ LED TV and it was only about 30 pounds. At least I know it isn’t going to fall off the wall! It was not difficult to mount. I was able to locate and mount it into two wall studs 16″ apart. The level that comes with it is pretty much worthless. I recommend using your own level if you want it nice and straight. Other than that, the instructions were good and mounting was no problem. It also comes with all the screws and parts you need to fit most any TV. I would definitely purchase this same mount again.

  3. Super heavy duty metal, the duel arms allow it to fold straight back not off center like single arms do. Love the straight vertical brackets that you simply place on back of TV with 2 screws provided per side (my 65in Samsung UN65H6350 uses 400×400 VESA spacing) with notches that allow you to simply lift TV in place after mounting the bracket to the wall with provided lag screws 1 for each corner for a total of 4 and tightening set screw at bottom of each vertical bracket took less then 20 minutes after I located the wall studs with helper to hold bracket while I leveled and marked holes for drilling pilot holes for lag screws, would purchase again.

  4. The mount is very sturdy for a 65″ LCD.Once the wall mount is on the wall, and brackets mounted on the back of the TV, hooking it onto the wall mount is very easy. There is room to move the TV left and right on the wall mount. So if the wall mount is not centered, adjustments can still be made. TV can also be rotated so if the wall mount is not perfectly leveled, there is still some room to adjust. It comes with different sizes of screws for the brackets that goes on to the TV. Smaller TV uses smaller screw. Larger TV uses bigger screws. They did thought this through.I do have a complaint:1. Screws were too long to be used for my Samsung 65″ TV. The ‘spacer’ it included was way too thick. If I don’t use the spacer, the screw bottoms before it even touches the bracket. If I use the spacer, screw doesn’t even touch a single thread on the TV. ACE Hardware has spacers that worked just right.

Add a review

Your email address will not be published. Required fields are marked *